
APPLICATION:
– Traditional mortar for indoor and outdoor use
– Suitable for erecting walls and pillars, foundations of bricks, hollow bricks and other ceramic, concrete or lime-sand materials
– for thick joints 6-40 mm
– compressive strength ≥5 N / mm 2
PROPERTIES:
– M5 class
– waterproof
– frost resistant
– good application properties
– good grip
– for reinforced and unreinforced walls and pillars
COMPATIBLE PRODUCT WITH: EN 998-2
TYPES AND PREPARATION OF SUBSTRATE:
Bricks, concrete blocks, blocks. The substrate must be dry and free from adhesion-impairing contaminants.

TECHNICAL DATA:
PACKAGE QUANTITY – 25 kg
QUANTITY ON A PALLET – 48 items
GRAINING – 0-2 mm
CONSUMPTION – 45 kg / m2
USE TIME – 60-180 min
JOINT THICKNESS – 5-40 mm
WATER CAPACITY – 3.8-4.0 l / 25 kg
Grey colour
COMPRESSIVE STRENGTH – 5 N / mm2
HEAT CONDUCTION COEFFICIENT ≤ 1.11 W / Mk
CHLORIDES CONTENT <0.1%
WATER ABSORPTION – category ≤ 1.5 kg / m2 * min 0.5
Use:
Block MAX with 28,8 cm thick | 71 kg/m2 |
Block MAX with 18,8 cm thick | 41 kg/m2 |
Block U with 25 cm thick | 52 kg/m2 |
Block U with 18,5 cm thick | 33 kg/m2 |
Block with 25 cm thick | 94 kg/m2 |
Block with 12 cm thick | 37 kg/m2 |
COMPOSITION:
– PORTLAND CEMENT
– QUARTZ AGGREGATE
– HYDRATED LIME
– PERFANCING ADDITIVES
MORTAR PREPARATION:
Pour the contents of the package into clean, cool water and then mix it with a slow-revolving mixer until a homogeneous consistency is obtained. Leave for approx. 5 minutes and mix again. Hardened mortar should not be added to the fresh mixture.
HOW TO USE:
The product should be used as intended, in accordance with the principles of good building practice and health and safety rules. Place the prepared mortar on the wall, keeping the binding principle. During the works and also while the mortar is drying, protect it against rainfall and strong wind by using special covers. The temperature of the air, substrate and product should be within the range of 5 ° C to 25 ° C. The masonry elements must be clean, free of impurities that would impair the adhesion of the mortar.
STORAGE:
The product should be stored in dry places and in undamaged packages.
Shelf life is 12 months from the production date.
Monika Szwajkowska
Chief technologist
Tel. +48 509-710-091
e-mail: monika.szwajkowska@elpologistyka.pl